1. When is the best time to transplant chives?
1. Repotting: To repot chives, the first step is to remove them from the pot. Be careful not to damage the roots, as this will affect their survival rate. Using a small shovel, start from the edge of the pot and work your way toward the bottom. Loosen the soil and then scoop the chives from the bottom upwards.
2. Division: Separate the chives one by one, breaking up large clusters into smaller plants suitable for replanting. To do this, gently hold the clusters and slowly shake off the soil. Then, separate the tangled roots to separate the large clusters.
3. Repotting: How to repot the leek lotus? The above two steps are preparation work. After that, you can transplant and repot: spread some nutrient soil in the new pot, then hold the leek lotus in one hand and use a shovel with the other hand to scoop soil around the leek lotus and pat it gently, but don’t make it too firm.
2. When is the best time to transplant the leek lotus?
Common propagation methods for leek lotus include division, sowing and cuttings. When using division, mainly cut the bulb part on the main branch and bury it in the soil and water it to keep it moist. When using the sowing method, mix the seeds with wet sand, cover the soil and keep it moist.
Methods of propagating leek lotus
1. Division
The bulb of leek lotus has a strong ability to divide. In early spring, remove the fat mature bulb part, cut off the branch stems above it, and place it in the prepared nutrient soil after disinfection. Keep the spacing between each plant at about 10 cm, and the depth should be such that the top of the stem is exposed to the ground. Water it every day to keep it moist and it will germinate quickly.
2. Sowing
When sowing leek lotus, first clean the seeds harvested in the mature season, place the seeds in a cool place to dry for a few days, remove the impurities on them and put them directly into wet sand, mix them in a ratio of 1:2, cover them with a layer of fine soil, and then cover them with straw mats. Keep them moisturized frequently and they will germinate in about a month.
3. Cuttings
Cuttings are also a propagation method for leek lotus. Cuttings are primarily taken from mature, robust tubers. Before planting, mix the soil with disinfectant and fertilizer, keeping the cut smooth. Insert the cuttings directly into a nutrient-rich substrate. Water thoroughly after planting, maintaining a temperature around 25°C. Once true leaves emerge, transplant them with soil.
4. Precautions
Leek lotus prefers warm climates. Seeding is typically done in spring, during April and May, when the weather is hot and rainy, making it ideal for seed growth and development. Cuttings can be taken in spring and autumn, and can be grown in a greenhouse in northern regions.
3. How to Plant Leek Lotus
Soil: Leek lotus is best suited to well-drained, humus-rich sandy soil. However, leek lotus is a hardy plant, so its soil requirements are not high for home cultivation. It can adapt to soils ranging from slightly acidic to slightly alkaline, and from sandy to light clay. You can place a layer of crushed hard plastic foam or broken bricks at the bottom of the pot to facilitate ventilation and drainage.
Light and Temperature: Chive Lotus prefers a warm environment. It generally blooms from June to September each year. Its optimal growing temperature is 16-28°C. It is not cold-tolerant, and the winter temperature should not drop below 5°C. If the indoor temperature is maintained above 15°C in winter, Chive Lotus will continue to grow healthily and may even produce flowers.
Chive Lotus prefers a sunny environment. Growing in a shaded environment will result in poor bulb quality. Although it can bloom in partial shade, the number of flowers is small and the flowering period is short. Excessive shade may result in a failure to bloom.
Watering: Chive Lotus prefers slightly moist to dry soil. It tolerates drought but is sensitive to waterlogging. During the growing season, the soil should be kept dry and moist, and never allow water to accumulate. After September, reduce watering. From November to February of the following spring, keep the soil slightly moist while keeping it slightly dry.
4. When is the best season to plant chives?
Chives should be planted shallowly. Planting too deep will weaken their tillering ability. Planting shallower will enhance their tillering ability and allow for faster rooting. The optimal planting depth is between 5 and 6 cm, which is more conducive to later growth. Before planting, prepare the soil, ensuring it is soft and fertile. Water thoroughly after planting and apply fertilizer appropriately during the growing season to ensure adequate fertility and water for vigorous growth.
5. When is the best time to transplant chives?
1. When transplanting chives, remove any weak leaves to ensure optimal survival. If you notice any pests or diseases on the plant, immediately prune any affected leaves to prevent the spread of the disease and to avoid harming the plant’s growth. 2. During normal maintenance, if you find yellow leaves, dead leaves and old leaves on the plant, you need to prune them in time.
3. The leaves of the plant need to be pruned before entering winter, but do not prune them after winter. However, if diseased or dry leaves grow, they must be pruned in time.
2. Notes 1. The tools used for pruning must be clean. If conditions permit, disinfect them first, and then prune the plant. But if they are not disinfected, they must be cleaned before use.
2. When pruning, if you prune the diseased leaves first, you must disinfect the scissors, and only after disinfection can you prune other leaves. Because if they are not disinfected, there will be residual bacteria on them, and if you prune other leaves again, they will be infected.
6. When to Transplant Chive Lotus
Chive roots are generally transplanted in late July or early August (if seedlings are weak and small, transplant them in early spring of the second year). Use the single-row deep trench planting method. Water the seedling pond thoroughly before planting. Remove the seedlings, leaving 2-3 cm at the root tips. Trim off two-thirds of the leaves to reduce evaporation. Dig trenches about 15 cm deep, spacing the rows 40 cm apart. Plant the seedlings 1-1.5 cm apart in the trenches. Water and cover with soil. When planting, aim for a depth that doesn’t cover the leaf nodes. After soiling, keep the trenches slightly lower than the rows, 4-6 cm below the level of the rows, to facilitate annual soiling and achieve high yields. Water twice after planting to loosen the soil and allow the seedlings to settle. Keep the soil moist from time to time. When the chives reach 15 cm in height, apply 10 kg of diammonium phosphate per mu (approximately 100 kg) of diammonium phosphate (DAP) per acre (approximately 100 kg). Apply additional topdressing every 20 days thereafter. After the beginning of autumn, the weather becomes cooler, so watering should be controlled appropriately. Winter watering should be provided before the soil freezes. If you’re not planting chives in summer, transplanting can begin when the seedlings have 4-5 leaves and are 18-20 cm tall. Before transplanting, apply 10,000-15,000 kg of soil and fertilizer, or 50 kg of superphosphate and 2.3 kg of zinc sulfate, per mu of the planting area. Spray the fertilizer with 800 times the concentration of 40% phoxim solution to prevent root maggots. Then, deep plow and carefully rake the ground to level it. After lifting the chives, shake off any soil from the roots. When transplanting, dig a shallow trench with a shovel, water, and then arrange the chives in the trench. When planting in rows, maintain a spacing of approximately 3.5 cm between plants and 30 cm between rows. After planting, cover with soil shallowly, ensuring that the soil does not cover the leaf sheaths or leaf segments. As the chives continue to grow, any excess soil between the rows will be buried within the rows through inter-row tillage. You can also plant in holes, with 15 plants per hole. Cover the hole with soil no thicker than the leaf sheath. Water immediately after planting and again after 5 days.
7. When is the best time to divide the leek lotus?
The leek lotus should be repotted around March each year to ensure the soil is loose and well-ventilated. You can mix plants of different colors in the pot to enhance the ornamental effect during flowering.
The leek lotus is primarily propagated by division and is generally transplanted in spring. Before planting, choose the right soil to ensure healthy growth and development. It’s best to choose loose, fertile, well-drained sandy soil. After transplanting, water the plant appropriately to promote root growth and survival.
8. When to plant the leek lotus
The leek lotus can be transplanted in the summer. The first step is to remove the leek lotus from the pot. Be careful not to damage the roots, as this will affect the survival rate. Using a small shovel, start digging from the edge of the pot toward the bottom, loosen the soil, and then scoop the chive lily from the bottom upwards.
Division: Separate the chive lily one by one, separating large clusters into smaller plants suitable for replanting. To divide, gently grasp each cluster and slowly shake off the soil. Then, separate the tangled roots to separate the large clusters.
9. How and When to Transplant Chive Lily
Chive Lily is a perennial plant. Yellowing of some leaves is normal after transplanting. This is due to damage to the root system, which impairs nutrient and water transport, resulting in physiological yellowing.
For newly transplanted chive lily, it’s best to mist the plant once thoroughly after planting. Watering is recommended afterward, depending on soil dryness. Maintaining moisture is not necessary. Also, avoid frequent digging and checking after planting, as this will hinder root growth. It’s best not to apply root fertilizer within a month of transplanting a new plant. For transplants with leaves, temporarily shade the plant by about 50%. After about 10 days, gradually remove the shade netting. Potted plants have better control over shading.
10. How and when to plant leek lotus
Leek lotus shouldn’t be watered with beer; it needs to be watered.
Leek lotus can be cultivated by division or bulb planting. Both methods can be planted in spring. Simply dig up the bulbs, plant 3 to 5 bulbs per location, and water to maintain appropriate humidity for easy survival.
Leek lotus gets its name from its resemblance to leeks. It prefers loose, fertile soil. Sandy soil with a high fertility content is best for cultivation, as it promotes root growth. Add some leaf mold to the soil to keep the surface moist.
11. When to plant leek lotus bulbs
French lily is commonly known as leek lotus. Native to South Africa, it was later introduced to China, where it became widely cultivated. The chive lotus is a dark green plant with slender stems and leaves, and a single pink flower per stem. Its fresh, elegant appearance is very appealing. The chive lotus blooms from June to September, blooming twice a year. Its floral language is simple, fragrant, distant, and long-lasting. The wind and rain lotus, as its name suggests, blooms more abundantly in wind and rain. As a bulbous plant in the Amaryllis family, it once grew freely in the wild in our area. However, as farmers began to prioritize cultivated land, these wildflowers, once found in the fields, largely disappeared, becoming cultivated domestically. We call the rain orchid the wind and rain lotus here because its flowers resemble lotus flowers. It blooms every spring, summer, and autumn, especially when planted outdoors in the summer, where a storm can produce a large number of buds. Others cultivate flowers with meticulous care, meticulous cultivation, and meticulous watering and fertilizing. Because I’m often away from home for work, I tend to use a more casual approach to flower care. I tend to only those plants that tolerate it, like Zephyranthes, and another like Kalanchoe. Through years of care, I’ve summarized a few tips.
The soil shouldn’t be too sticky
Zephyranthes are resilient and tolerant of poor soil, drought, heat, and waterlogging. I use simple soil: dirt dug from the ground mixed with coal slag. The reason for this is to prevent the soil from becoming too sticky. Clay soil is airtight, making it prone to rot and preventing the Zephyranthes bulbs from taking root. Also, don’t overfertilize the soil at the beginning, and don’t overly loosen it either. For example, pine needle powder is not recommended. I had a pot of Clivia that wasn’t growing well. I pulled it out and planted several Zephyranthes bulbs, but they kept growing sickly. After pulling it out, I realized the soil was too loose, making it difficult for the roots to take root in mid-autumn.
Must have ample sunlight
Ziamphia likes sunlight and prefers long days. If it is deprived of sunlight for a long time, it will not only fail to bloom, but its leaves will also easily turn yellow and even become weak and boneless. In summer, as long as it has sufficient water, it will not be sunburned even under the scorching sun. The better the sunlight, the easier it is to bloom. In addition, it must not be planted too densely. If the water and fertilizer are appropriate during the growth of Ziamphia, the bulbs are very easy to divide. If it is too dense, it will easily become closed and the leaves will rot. At the same time, due to poor light after being too dense, the differentiation of flower buds will be affected.
Must pay attention to division
As mentioned earlier, Ziamphia bulbs are easy to divide. Therefore, if it is found that the growth is too dense during maintenance, it is necessary to take measures such as thinning and division as soon as possible. Large bulbs are easy to produce flower bud differentiation. When it is too dense, the bulbs are crowded together. It is difficult for all plants to produce flower bud differentiation in order to obtain nutrients. Therefore, if it is too dense, it is necessary to divide the bulbs immediately. When digging out the bulbs, be sure not to damage the roots of other bulbs. Dig the division bulbs gently.
Flowers bloom more vigorously after a few days of drought
Zimphora loves water, but I discovered a problem during the planting process. Once I was on a business trip and didn’t have time to water it, after two days of drought, I would suddenly water it. A few days later, a layer of flower buds would grow and it would bloom soon. This rule is always accurate, so occasionally drying it for two days would result in better flowering. Zizzorania, as the name suggests, blooms more vigorously when there is wind and rain. As a bulbous plant of the Amaryllidaceae family, it could originally grow freely in the wild here. Later, as farmers paid more attention to cultivated land, these wild flowers that originally lived in the fields basically disappeared and became people’s domesticated flowers. Zizzorania, we call it Zizzorania here because its flowers are quite lotus-like. It blooms every spring, summer and autumn, especially when planted outdoors in the summer. After a storm, a large number of flower buds will grow. Others grow flowers with meticulous care, intensive cultivation, and meticulous watering and fertilizing. Because I’m often away from home for work, I tend to use a more casual approach to flower care. I tend to only those plants that tolerate it, like Zephyranthes, and another like Kalanchoe. Through years of care, I’ve summarized a few tips.
The soil shouldn’t be too sticky
Zephyranthes are resilient and tolerant of poor soil, drought, heat, and waterlogging. I use simple soil: dirt dug from the ground mixed with coal slag. The reason for this is to prevent the soil from becoming too sticky. Clay soil is airtight, making it prone to rot and preventing the Zephyranthes bulbs from taking root. Also, don’t overfertilize the soil at the beginning, and don’t overly loosen it either. For example, pine needle powder is not recommended. I had a pot of Clivia that wasn’t growing well. I pulled it out and planted several Zephyranthes bulbs, but they kept growing sickly. After pulling it out, I realized the soil was too loose, making it difficult for the roots to take root in mid-autumn.
Must have ample sunlight
Ziamphia likes sunlight and prefers long days. If it is deprived of sunlight for a long time, it will not only fail to bloom, but its leaves will also easily turn yellow and even become weak and boneless. In summer, as long as it has sufficient water, it will not be sunburned even under the scorching sun. The better the sunlight, the easier it is to bloom. In addition, it must not be planted too densely. If the water and fertilizer are appropriate during the growth of Ziamphia, the bulbs are very easy to divide. If it is too dense, it will easily become closed and the leaves will rot. At the same time, due to poor light after being too dense, the differentiation of flower buds will be affected.
Must pay attention to division
As mentioned earlier, Ziamphia bulbs are easy to divide. Therefore, if it is found that the growth is too dense during maintenance, it is necessary to take measures such as thinning and division as soon as possible. Large bulbs are easy to produce flower bud differentiation. When it is too dense, the bulbs are crowded together. It is difficult for all plants to produce flower bud differentiation in order to obtain nutrients. Therefore, if it is too dense, it is necessary to divide the bulbs immediately. When digging out the bulbs, be sure not to damage the roots of other bulbs. Dig the division bulbs gently.
Flowers bloom more vigorously after a few days of drought
Zenias love water, but I’ve noticed a problem with my growing process: if I’m away on business and don’t have time to water them, after two days of drought, a sudden watering will trigger a layer of flower buds and bloom quickly. This pattern always works perfectly, so occasionally giving them a two-day dry spell will help them bloom even more effectively.